PAIR blanking kit for the SV1000, this is the ultimate kit with everything you need to block off the PAIR system. The kit includes:
- x2 Blanking Plates
- x2 Gaskets for Plates
- x4 Stainless bolts
- x1 Rubber Bung
- x1 Wiring Connector
Fitting:
Unplug the PAIR system from the original wiring connector and plug our connector into the wiring connector of the bike, this eliminates the FI light.
Remove the pipe from the airbox to the PAIR system and fit our bung on the airbox.
Remove the plastic covers from both front and rear cylinders and remove the valve inside the cover too. Fit the gasket and the blanking plate and secure them with the bolts provided (we recommend using some copper grease on the bolts). And your finished!
Once it's done you'll remove everything in the 3rd image from your bike.
What is a PAIR system?
PAIR systems recirculate air from the airbox into the exhaust system to reduce emissions. This can be a particular problem and causes popping and banging in the exhaust when fitting aftermarket exhaust systems.
Why blank it off?
Blanking the PAIR system off gives your bike an accurate air/fuel mixture reading how it was originally intended, therefore making your bike easier to accurately re-map.
It reduces the popping and banging under deceleration for a smooth run when your off the throttle (if you have aftermarket exhaust fitted).
It also reduces weight and clutter as the whole PAIR system can be completely removed.
This doesn't affect the MOT in any way in the UK, however we are unsure how it affects anything from a legal point of view in other countries. Please check yourself.